Fast > Ensure a very high production rate (30 seconds cycle time)
Compact > Under 22 ft² floor space
Efficient > Ensured special cleanliness | Standards ISO 16232 – VDA 19
Robot friendly > Cleaning in robotic cell
One piece flow > One piece flow cleaning process without buffer
Lean manufacturing solution
The MecanoFAST machine ensure a high cleaning rate from 20 to 60 seconds depending on the type of parts and their complexity!
The MecanoFAST concept has been created to be integrated into production line with a short footprint to reduce technician walking time.
Under 22 ft² floor space
Width 2′ 3 9/16” (700mm)
The batch/basket cleaning concept generates a major disruption for the production efficiency resulting in slowing down the flow and generating downstream and upstream stock.
The MecanoFAST system has been developed for the high pace industry, this equipment use the “one-piece flow” concept with a short cycle time.
Continuous flow : no batch
Loading and unloading on the same fixture
Single piece, no buffer
Quick detection of machine failure
The part fixture, the cleaning/drying tool are designed in 3D model and produced according to the parts drawing.
Cleaning and drying difficult reaching areas, cavities, blind holes, thread, etc…
Part exit temperature below 95°F
The MecanoFAST integrates high quality components from premium brands.
Display and process data monitoring using the touch screen interface
Automatic detergent addition / topping up
Programmable partial drain
Is your assembly or production line operate manually or fully automated ?
The MecanoFAST system has a large front loading/unloading access for a quick and efficient load.
Quick change over > replace tooling in less than 5 minutes !
Reconfiguration > only the tooling need to be replaced to run a different part number.
Integration of an indexed rotary table ensuring loading/unloading in masked time during cleaning cycle.
Also allows the integration of additional post cleaning process such as marking, traceability, quality check etc…
We support you by setting up validation test and analysis in our laboratory.
Gravimetry and granulometry
Standards ISO 16232 – VDA19
Surface tension measurement
A roller shutter combined with a set of sensors to ensure a secured and simplified access to the filtration system, tank and other moving parts.
Self-cleaning of the operating chamber
Automatic or complete partial draining
Maintenance monitoring management via IHM
Possibility to connect a measuring detergent unit
Solve our customer cleanliness issues by finding out the best Industrial parts washers. Our industrial parts cleaning machines can be perfectly adapted to your production lines.
Depending on your parts, contaminants and cleanliness requirements, together we can define the most appropriate process for cleaning your industrial parts, using our machines and different technologies.
Discover our cleaning technologies adapted to each of the sectors in which we operate. From the automotive sector to aeronautics and railways. We offer parts cleaning solutions for the medical, oil and general industrial sectors.
Cleaning crankshaft with a MecanoLav MecanoFAST for the automotive industry and heavy trucks in inter-operation
Particle cleaning with a MecanoLav MecanoFAST for aluminium rack housing after machining in inter-operation
Particle decontamination with a MecanoLav MecanoFAST machine to clean injection ramps before assembly and leak test
Hydraulic body cylinder degreasing with a MecanoLav MecanoFAST after machining and welding in final wash.