Cleaning and drying injection ramps

Particle decontamination for injection ramps before assembly or leak test

Cleaning and drying of injection ramps (Common rail)

Several OEMs in the automotive industry have already asked us to develop machines to clean injection ramps (Common rail), after machining, before assembly and leak test, in robotic cells.

Cleaning, degreasing and particle decontamination on fuel rail for automotive

Particle decontamination in a high pace environment

2 different parts reference are washed simultaneous in less than 37 seconds.

Contamination -> cutting oil and chips

ID / OD cleaning according to the following criteria :

  • 2 mg / 1000 cm² (gravimetry)
  • 0 particules > 200 µm for aside diameter
    ( granulometry)
  • Perfect drying
Cleaning, degreasing and particle decontamination of fuel rail for automotive

One piece flow cleaning

The parts are loaded vertically by a robot and automatically clamped on a custom-made pallet.

The 3-positions rotating table allows you to load parts in masked time and to unload by a second robot in the clean room. In case of the robot is not working properly, loading is still possible in manual mode secured by light curtains.

A specific washing and drying tool performs the cleaning of the part (OD). An optimized syringe with oscillating movement cleans and dries the inside of the injection ramp (ID/ports).

Cleaning, degreasing and particle decontamination on fuel rail for automotive